We are No#1 in CUTTING MACHINE, PAPER MAKING MACHINE, PAPER CUTTING, PAPER CUTTER, THREE KNIFE TRIMMER, TRIMMER MACHINE MANUFACTURERS,  GATHERING MACHINE , BINDING MACHINE, BOOK BINDING, OFFSET PRINTING MACHINES, NEWSPAPER PRINTING MACHINE, BOOK PRINTING, MAGAZINE PRINTING  &  NEWS PAPER MACHINES.
CUTTING MACHINE,Cutting Machines,PAPER MAKING MACHINE,PAPER CUTTING,PAPER CUTTER,THREE KNIFE TRIMMER
 
Cutting Machine

 

Sudarshan Programmable high Speed Cutting Machine

Salient Features :

  • Radial, Streamline, Box type design of parts & high grade material of main parts, gives rigidity & long life to machine. Best quality materials are used to withstand wear, Strain & stress.

  • Positive drive hydraulic clutch ensures quick action, less wear, long life clutch system.

  • Two row eight beams infra-red curtain in front of cutting zones to avoid accidents with row selection facility.

  • Telescopic double pressure cylinder with almost pipe less power pack.

  • Complete Hydraulic device for less maintenance & sleepage free operation.

  • Graduated back gauge knobs for horizontal and vertical right angle setting of back gauge.

  • Programme controlled air table for easy movement of bulky stock.

  • Pressure knob for adjustment of pressure from 200 kgs to 4500 kgs.

  • Mechanical device to avoid serious damage by providing overload bolt.

  • Flush type, dustproof, Feather touch keyboard for smooth operation of programme unit.

  • A.C. drive system for smooth and uniform movement of backgauge.

 

Technical Specifications :

Model Unit SPR72 h SPR85 h  SPR95 h  SPR 115 h  SPR 137 h
Cutting Width mm 720 850 950 1150 1370
Feed Depth mm 720 850 950 1150 1450
Clamp Opening mm 100 130 130 165 165
Weight Net K.g 1000 1800 2400 3200 4000
Machine with without side table mm 1445 1985 2085 2500 2705
No. of cut in continuous run/min. Nos. 32 42 40 40 40
Front table height mm 580 680 680 750 750
Table height mm 900 885 885 900 900
Clamp pressure (Min.) K.g 200 400 450 500 550
Clamp pressure (max.) K.g 1250 2500 3500 4000 4500
Smallest cut without false clamp mm 20 20 25 25 30
Smallest cut with false clamp mm  65 85 85 85 85
Back gauge speed(normal) mm/Sec 50 50 50 50 50
Back gauge speed (Express) mm/Sec 200 200 200 200 200
Supply Voltage (3ph 340-500v) Amp  16 20 20 20 25
Size of wire mm 2 2.5 2.5 2.5 4
Power required (main drive) H.P. 2 3 3 5 7.5
Total power required H.P. 4 5 5 7 9.5

 

Sudarshan Magic Cut 115

Salient Features :

  • TFT-LCD colour screen with graphical support. External progrmming of job made easy by online graphical support.

  • Flush type, dustproof, Feather touch keyboard for smooth operation of programme unit.

  • Extensive memory for saving large no. of jobs

  • User friendly programming system provides flexibility for large and small jobs.

  • Online monitoring system with inbuilt help system

  • Programme controlled airtable for easy movement of bulky stock

  • Machine has online bypass facility with digital positioning systems

  • All functions are online like selection of programme, calibration of machine, clear-correct-insert steps, cut counter, online messaging system and many more .

  • Any critical job programming can be done by Cut & Store, Ten Key Programming and Tabulation programming method.

  • High speed backage travelling 200 mm/Sec for faster positioning and more production.

  • Radial Streamline, Box type design of parts & high grade material of main parts, gives rigidity & long life to machine. Best quality materials are used to withstand wear, strain & stress.

  • Positive drive hydraulic clutch ensures quick action, less wear, long life clutch system

  • Two row eight beams infra-red curtain in front of cutting zones to avoid accidents with row selection facility.

  • Telescope double pressure cylinder with almost pipeless powerpack. Enclosed hydralic tank in the main body to protect leakage of oil.

  • Complete hydraulic device for less maintenance & anti Slip operation.

  • Pressure knob for adjustment of pressure from 200 Kgs. to 4500 Kgs.

  • Graduated back gauge knobs for horizontal and vertical right angle setting of back gauge.

  • A.C. drive system for smooth and uniform movement of backgauge.

  • Ball screw with linear motion guide is provided for uniform movement of backgauge.

  • Mechanical overload device to avoid serious damage against overload condition of machine

  • Calibration accuracy of backgauge - 0.001 cm ensure higher repeat accuracy.

 

Model Unit 72 85 95  115   137 
Cutting Width mm 720 850 950 1150 1370
Feed Depth mm 720 850 950 1150 1450
Clamp Opening mm 100 130 130 165 165
Weight Net K.g 1000 1800 2400 3200 4000
Machine with without side table mm 1445 1985 2085 2500 2705
No. of cut in continuous run/min. Nos. 32 42 40 40 40
Front table height mm 580 680 680 750 750
Table height mm 900 885 885 900 900
Clamp pressure (Min.) K.g 200 400 450 500 550
Clamp pressure (max.) K.g 1250 2500 3500 4000 4500
Smallest cut without false clamp mm 20 20 25 25 30
Smallest cut with false clamp mm  65 85 85 85 85
Back gauge speed(normal) mm/Sec 50 50 50 50 50
Back gauge speed (Express) mm/Sec 200 200 200 200 200
Supply Voltage (3ph 340-500v) Amp  16 20 20 20 25
Size of wire mm 2 2.5 2.5 2.5 4
Power required (main drive) H.P. 2 3 3 5 7.5
Total power required H.P. 4 5 5 7 9.5

 

HEAVY DUTY HIGH SPEED SEMI AUTOMATIC HAND CLAMP
PAPER GILLOTINE MACHINE WITH MOTORISED BACK GAUGE

( LATEST DESIGN-TOTALLY ENCLOSED MODEL)

Fully Automatic High speed Paper Cutting Machine is ideal for large and medium size printing, Packaging, Binding houses as well as for Paper Mills & other allied enterprises for Paper Cutting in large quantities. This machine is most economical, Reliable & Perfect for accurate precision cutting.

SALIENT FEATURES

  • Sturdy graded construction.

  • Efficient and smooth working of hand clamp.

  • Specially designed mechanical clutch & Brake ( OPTIONAL: Electro magnetic clutch & brake system)

  • Motorised back gauge with manual micro adjustment.

  • High pitch of the back gauge lead screw.

  • Convenient knife changing.

  • The knife is adjustable by eccentric levers.

  • All moving part are protected by  metal guards.

  • Certralised lubrication of all moving part.

  • Grease cups fitted at the shaft bearings.

  • Measurement indicator at eye level.

  • Lighting on the cutting line.


TECHNICAL SPECIFICATIONS

MODEL  PL-33 PL-36 PL-42
Length of cut 33" (840mm) 36" (900mm) 42"(1060mm)
Width of cut 33"(840mm) 36" (900mm) 42"(1060mm)
Height of cut 4"(100mm) 41/2"(113mm) 5"(127mm)
Cut per minute 30 25 20
Power 2+1/2 HP 2+1/2 HP 3+1/2 HP
Floor space 1650x1650mm 1950x1950mm 2150x2150mm


HIGH SPEED FULLY AUTO PAPER GUILLOTINE

SALIENT FEATURES

  • Heavy & Sturdy construction

  • Automatic Clamping

  • Electro Magnetic Clutch Brake

  • Easy & Safe Controls

  • Centralised Lubrication

  • Photo Cell Safety Device & Fail Safe

  • Brake for operator's safety

  • Individual Motorised back gauge with micro adjustment by hand

  • Measure indicator at eye level

  • Extended side table for easy paper handling & storage

  • Lighting on Cutting line.

OPTIONAL

Digital measure indicator at eye level

STANDARD ACCESSORIES

2 Knives, Cutting Stick, Complete set of Tools

TECHNICAL SPECIFICATIONS

MODEL PL-33 PL-36 PL-42 PL-45 PL-52
Cutting Width 33"(840mm) 36"(900mm) 42"(1070mm) 45"(1150mm) 52"(1300mm)
Pile Height 41/2" 41/2" 5" 5" 5"
Cut per Minute 25-30 25-30 25-30 20-25 20-25
Power 3+1/2 HP 5+1/2 HP 5+1/2 HP 5+1/2 HP 5+1/2 HP
Weight (Approx.) 2500Kgs. 3000Kgs. 3200Kgs. 3500Kgs. 3600Kgs.


Sheet Fed Offset Machine | Perfect Binding Machine | Gathering Machine |  Folding Machine
 Sewing Machine | Three Knife Trimmer | Cutting Machine

CUTTING MACHINE,Cutting Machines,PAPER MAKING MACHINE,PAPER CUTTING,PAPER CUTTER,THREE KNIFE TRIMMER

Home | Our Profile | News Paper webs | Contact | Dealership Enquiry
Global presence | Request a Quote